Rebar Stakes

Rebar Stakes are ribbed-profile stakes driven into the ground for temporary form retention and site layout. The deformed surface increases ground engagement and resists pull-out.

Request a quote Contact sales ↗

At a glance

Rebar Stakes at a glance.

Definition

A ribbed-profile form stake

A deformed-surface stake for temporary forms, site layout and concrete preparation.

Application

Driven beside boards

The ribbed surface increases ground friction and locks the stake in position beside a board or at a layout mark.

Product form

Diameter, lengths and grades

5/8 to 1 inch diameter; 16 to 56 inches length; C1008–C1040 material; multiple finish options including painted and galvanized.

How it works

Driven and locked by ground resistance

Drive the stake beside the form board or at the layout mark. Ground friction engages the deformed ribs and holds it rigidly in place.

Round Stakes
Choose round stakes for general board holding: the circular section drives cleanly beside wood or plywood boards.
Flat Stakes / “C” Mouth Stakes
Choose flat stakes when you want a flat bearing surface against the board and good ground resistance to turning.
Square Stakes
Choose square stakes when you want four flat sides to set squarely against formwork boards.
Rebar Stakes This page
Choose rebar stakes when you want the ribbed surface and tensile strength of reinforcing bar for driven hold-down work.

Common applications

Where it is used.

Application

Slab edge retention

Ribbed surface anchors temporary form boards at slab and flatwork edges.

Application

Foundation and footing layout

Marks and retains temporary form positions during footing preparation.

Application

High-engagement ground conditions

The deformed profile performs better than smooth stakes in loose or soft ground.

What are rebar stakes?

Rebar stakes are driven steel stakes with the ribbed profile of reinforcing bar, made in C1008–C1040 steel. They are set beside form boards to hold temporary concrete forms in line and they come plain, painted, galvanized or powder coated.

What specifications do rebar stakes have?

Rebar stakes are supplied in diameters from 5/8" to 1" (16–25 mm) and lengths from 16" to 56" (300–1400 mm). Finishes available include plain, painted, galvanized and powder coated for various site conditions.

Concrete systems

Ribbed-profile form and layout stakes

Deformed ribs engage the ground more aggressively than smooth round or flat profiles. Round, Flat / C-mouth and Square Stakes provide smooth alternatives; Formwork Pins handle pin-driven work.

Explore concrete systems ↗

Rebar Stakes specifications