Product family
Access and safety
Guarding for the open edges of platforms, stairs and walkways.
- Fabricated Hand RailsPosts, top rails and mid rails set out to the structure.
Product family
Fabricated Products
Some steel parts never come off a standard list. GV sources them made to order: hand rails for platforms and stairs, recessed covers that take block paving, post saddles set into concrete footings, turnbuckle aligners that pull formwork into line, and other custom components. None has a stock size or a fixed specification. Qualified manufacturing partners make each one to the buyer's drawing, sample or requirement, and GV quotes it for that order.
Enquire about this range
Product families
Five products, each made to order.
Organized by type.
Product family
Paving and footings
Steelwork that finishes in the ground, flush with the paving or set into a footing.
- Block PaviourRecessed cover that takes the surrounding pavers.
- Rebar Carport SaddleHolds a timber post clear of its concrete footing.
Product family
Formwork
Adjustable bracing that sets form faces to line before and during a pour.
- Turnbuckle Form AlignerTurnbuckle brace between the form and a ground stake.
Product family
Other custom parts
Made-to-order steel products that do not fit a standard family.
- Axle StandCustom steel product made to your requirement.
Where it's used
Steel made for the job in front of you.
Plants, warehouses and mezzanines
Raised platforms, mezzanine floors, stair flights and walkways need guarding along every open edge. The railing has to follow the structure it is fixed to, so post positions, returns and stair rakes are set out from the site drawing. Fabricated Hand Rails do this work.
Paved driveways, courtyards and plazas
Where block paving runs over drainage and service chambers, a plain cover breaks the pattern. A recessed tray filled with the same pavers keeps the access point in line with the surface around it. Block Paviour is made for these surfaces.
Carports, pergolas and verandas
Timber posts do better standing clear of the concrete and the wet ground around a footing. A saddle set into the footing holds each post above the surface and takes bolts through its side plates. The Rebar Carport Saddle is built around that detail.
Walls, footings and kerbs formed in place
Formwork is set to a string line, then has to stay on that line while concrete is placed against it. Adjustable braces between the forms and the ground push or pull each face until it is plumb and straight, and hold it there through the pour. That is the job of the Turnbuckle Form Aligner.
How GV sources this
From specification to delivery in four steps.
Specify
You define the specification, drawing, or standard. We work with your engineering requirements—ASTM grades, dimensions, finishes, certifications.
Qualify partner
We audit and certify manufacturing partners in India. First-article inspection and approval. Blanket orders or scheduled releases as you need.
Inspect & document
Pre-shipment inspection and third-party verification on request. Mill test reports, coating certificates, dimensional reports—documentation packs in every container.
Deliver to US site
Consolidated shipments to US ports and job sites. Landed-cost pricing in USD. Single point of contact in Katy, Texas for order management and support.
Questions answered
Common questions about custom fabrication.
Why do fabricated products have no standard sizes?
Fabricated products are made to fit one structure, surface or form. A hand rail follows the platform it guards, and a recessed cover matches the chamber and paving it sits in. GV works from the buyer's drawing, sample or requirement, so every order is sized and quoted on its own.
What does a quote for a fabricated part need?
A drawing or sketch with the main dimensions, the quantity, the finish and the US delivery location. Photographs of an existing part, or a sample, also work as a starting point. The GV team reviews the requirement and asks for anything missing before the quote is prepared.
Does GV source parts that are not listed here?
Yes. The products in this range are examples of made-to-order work. Send the drawing, sample or specification for any steel component. GV reviews the requirement with you, places it with a qualified manufacturing partner for the processes it needs, and manages inspection and delivery to your job site or distributor.
What finishes are fabricated parts supplied in?
The finish is part of the requirement, not a catalog option. State the coating the job calls for, such as paint or galvanizing, together with any color and the conditions the part will face. GV confirms the finish with its partner and quotes it together with the part.
Ready to get started?
Our team is ready to help you find the right products.